* After printing is finished, disable the setting for preventing double-feed of plain paper otherwise, the setting is applied from the next time. If multiple sheets of plain paper is fed from the machine, select the setting for preventing double-feed of plain paper using the operation panel or your computer. When the cassette is set properly, you hear an electric sound once.Ĭheck6 Confirm that the media type and the paper size settings correspond with the loaded paper.Ĭheck7 If multiple sheets of plain paper is fed from the machine, select the setting for preventing double-feed of plain paper. Push the cassette so that the mark on the cassette aligns with the front panel as illustrated below. If the envelopes are placed in landscape orientation, they will not feed properly. Once you have prepared the envelopes, load them in portrait orientation.
When printing on envelopes, refer to Loading Paper, and prepare the envelopes before printing. When you load the paper, insert the paper stack until the leading edge touches the far end of the front tray.Ĭheck3 Check to see if the paper you are printing on is not too thick or curled.Ĭheck4 Make sure of the following when you load envelopes. When you load the paper, load the paper with the print side facing DOWN and slide the paper guides to align with the both sides of the paper. In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit.Īlways load the paper in portrait orientation, regardless of the printing orientation. However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit. When loading two or more sheets of paper, align the edges of the sheets before loading.